Why you really want to choose Soldamatic over anything else:

  1. Augmented reality welding simulation technology
  2. Comprehensive Training module
  3. Frequently upgraded methodology
  4. Best e-learning platform
  5. International training program
  6. Report maintenance system
  7. Green technology

If you are here searching for the guide on welding simulations using Abaqus then you must visit this page Welding Simulations Using ABAQUS: A Practical Guide for Engineers

You can also refer to this research on simulated post-weld heat treatment on microstructure.

Finally, the days of unsafe welding programs for rookies are over as Welding simulations is here with the help of Soldamatic, which is the new normal. Moreover, the training can be done by anyone without the general hazards of real-life welding.

So now, If you are looking for the pricing of welding simulators for smaw gtaw gmaw price, please contact us at 9986084280 or 9980043260 or drop us a message in this form.

There are four major types of weldings across the industry:

  • MIG – Gas Metal Arc Welding (GMAW)
  • TIG – Gas Tungsten Arc Welding (GTAW)
  • Stick – Shielded Metal Arc Welding (SMAW)
  • Flux-cored – Flux-cored Arc Welding (FCAW)

So, tell us which one are you looking for and If you are you looking for a spark welding machine, call our industry experts on this number 9986084280.

Soldamatic Specifications

WELDING PARAMETERS IN THE SIMULATOR 
Make/ ModelSEABERY / SOLDAMATIC
TechnologyAugmented Reality
INPUT SUPPLYSINGLE PHASE 230V
CURRENT RANGE – SMAW50A – 240A (2.5, 3.15 & 4MM ELECTRODE)
VOLTAGE & CURRENT RANGE –
GMAW
10V – 32V & 25A – 270A (0.8, 1.0, & 1.2 DIA WIRE)
CURRENT RANGE – GTAW25A – 270A (2.0 FILLER ROD)
PARAMETER ADJUSTMENTCURRENT, VOLTAGE, WIRE FEED SPEED & GAS PRESSURE.
WEIGHT OF THE SIMULATOR UNITLESS THAN 20 KGS. STURDY & METAL BODY DESIGN.
  
  
WELDING PRACTICES IN THE SIMULATOR 
PROCESS SIMULATEDSMAW, GMAW, FCAW AND GTAW.
COMPONENT SIMULATION POSSIBILITIESACTUAL COMPONENT SIMULATION & ROBOTIIC INTEGRATTION POSSIBILITY.
PHYSICAL WORKPIECESBUTT, FILLET, LAP, PIPE to PIPE AND PIPE TO PLATE JOINTS.
WELDING POSITION1F TO 6F POSITIONS IN FILLET AND 1G TO 6G POSITIONS IN GROOVE.
WORKSHOP SKILL TRAININGPROVISION TO PLACE WORKPIECE IN A FIXED STAND/LOCATOR. THE STUDENT MUST LEARN TO WELD WHERE WORKPIECE IS IN A FIXTURE.
INDUSTRY SKILL TRAININGPROVISION TO PLACE WORKPIECE ANYWHERE ON A WORKTABLE. THE STUDENT MUST LEARN TO WELD WHERE WORKPIECE IS NOT IN A FIXTURE.
THICKNESS OF BASE MATERIAL3MM, 6MM & 10MM
WELDING PRACTICEWORKPIECE TO PROVIDE MINIMUM 10-INCH-LONG WELD BEAD PRACTICE.
TORCH CONTROL – GMAW & GTAWTWO STEP AND FOUR STEP CONTROLS.
TORCHES – GMAW & GTAWREAL INDUSTRIAL TORCHES FOR REAL FEEL AND WEIGHT (ANY REPUTED MAKE LIKE TBI OR BINZEL).
  
  
WELDING SIMULATION IN THE SIMULATOR 
SIMULATION TECHNOLOGYAUGMENTED REALITY
SIMULATION METHODOLOGYGREEN LEARNING WITH NO REAL ARC OR REAL FUMES.
WELD BEAD SIMULATIONREAL 3D SIMULATION. NO TORCH TRACKING MOVEMENT ON MONITOR WITH GRAPHIC IMAGING.
VIRTUAL & ACTUALTHE WORKPIECE, TORCHES AND ELECTRODE MUST BE REAL HARDWARE AND THE SIMULATION  MUST BE VIRTUAL OBJECTS VISIBLE THOUGH THE REALITY MASK.
OBJECT SIMULATION100% VIRTUAL OBJECTS SUPER IMPOSED ON REAL OBJECTS AND SEEN THROUGH THE REALITY HELMET.
ENVIRONMENT SIMULATION100% REAL ENVIRONMENT SEEN THROUGH THE REALITY HELMET DURING WELDING.
HARDWARE OBJECTSHARDWARE OBJECTS ARE SMAW HOLDER, SMAW ELECTRODE, GMAW TORCH, GTAW TORCH, TIG FILLER AND ALL WORKPIECES.
SOFTWARE ACCREDITATIONSOFTWARE MUST BE ACCREDITED BY ANY INTERNATIONAL WELDING SOCEITY AND DESIGNED & DEVELOPED BY ANY GLOBAL OEM EXCEPT FROM CHINA.
WELDING PRACTICEPRACTICE ON PHYSICAL WORKPIECE – MINIMUM 10-INCH-LONG WELD BEAD.
SMAW WELDING PRACTICEDURING SMAW WELDING PRACTICE, PHYSICAL ELECTRODE (HARDWARE) TO BE USED AND THE SAME MUST RETRACT SIMULATIING THE CONSUMPTION OF ELECTRODE.
  
  
WELDING GUIDANCE IN THE SIMULATOR 
GUIDANCE FOR PARAMETERSGREEN / RED SIGNAL INSIDE HELMET – CURRENT, VOLTAGE, ETC… THE STUDENT MUST ALWAYS BE ABLE TO SEE IF THE PARAMETERS ARE CORRECT OR WRONG EVEN AFTER HE STARTS WELDING. THE SIMULATOR MUST HAVE INDICATORS TO GUIDE THE STUDENT. RED INDICATION HELP HIM TO ALTER THE PARAMETERS EVEN AFTER HE HAS STARTED WELDING.
GUIDANCE FOR HEAD POSITIONGREEN / RED SIGNAL INSIDE HELMET – HEAD TO WORKPIECE, UP/DOWN, ETC… SIMULATOR MUST GUIDE THE STUDENT ON THE CORRECT HEAD POSITION THROUGH RED ARROWS INDICATORS ALL THROUGH OUT THE WELDING PRACTICE.
GUIDANCE FOR SKILLSSIMULATOR TO GUIDE THE STUDENT ON ALL THE SKILL SETS LIKE: STICK OUT, PATH, ARC LENGTH, WELDING SPEED, WORK ANGLE AND TRVEL ANGLE. IN GTAW, IT MUST GUIDE ON THE WORK AND TRAVEL ANGLE OF THE FILLER ROD.
WELDER VIEWWELDER WILL BE ABLE TO SEE THE REAL WORKPIECE FROM INSIDE THE HELMET. AT ANY POINT DURING THE WELDING, HE MUST BE ABLE TO TOUCH / ROTATE / ADJUST THE WORKPIECE.
REALITY HELMETHD FLAT SCREEN HELMET – GOGGLE LESS VISION FOR USER COMFORT. STUDENTS / TRAINERS USING SPECTACLES MUST BE ABLE TO USE IT CONVENIENTLY.
  
  
WELDING ASSESSMENT IN THE SIMULATOR 
SKILLS ANALYSIS FOR TORCHGUIDANCE / ANAYSIS FOR ARC LENGTH, STICK OUT, SPEED, WORK ANGLE , TRAVEL ANGLE & PATH.
SKILLS ANALYSIS FOR GTAW FILLERGUIDANCE / ANAYSIS FOR WORK ANGLE AND TRAVEL ANGLE.
VISUAL EVALUATIONHOLD THE WORKPIECE IN HAND AND INSPECT. LIFT, ROTATE, TURN AND SEE THE WELDING FROM ALL POSSIBLE ANGLES.
DUAL ACCESSONLINE ACCESS FOR STUDENT PRACTICE AND OFFLINE ACCESS FOR TRAINER TO EVALUATE THE PREVIOUS PERFORMANCE MUST HAPPEN PARALLELLY.
TRAINER ACCESSOFFLINE ACCESS OF THE TRAINER FOR EVALUATION, ANALYSIS, DATA FEEDING ETC… WHEN THE STUDENT IS PRACTICING.
  
  
ACCESS FROM EXTERNAL PC 
FOLLOWING ACTIVITIES TO BE CARRIED OUT FROM AN EXTERNAL PC. THE SIMULATOR TO BE USED ONLY FOR SIMULATION PRACTICES AND NOT TO BE USED FOR DATA INPUT, REPORT GENERATION & FEEDBACK ANALYSIS. ADD, EDIT & DELETE STUDENT NAMES.
ADD, EDIT & DELETE COURSES.
ADD, EDIT & DELETE MODULES.
 UPLOAD OF PDF DOCUMENTS.
 CREATING OWN WPS.
 EVALUATION OF STUDENT PERFORMANCE.
 SUPPLIER TO PROVIDE COMPATIBLE SOFTWARE FOR OFFLINE ACCESS TO THE TRAINER TO CARRY OUT THE ABOVE ACTIVITIES THROUGH EXTERNAL PC.
  
  
KEY FEATURES FOR SAFETY, QUALITY, VALIDATION AND AUTHENTICITY 
SAFETY REGULATIONSCOMPLY WITH CE AND FCC REGULATIONS – CERTIFICATE TO BE ENCLOSED.
STURDY DESIGNSIMULATOR TO BE MADE OF STEEL STRUCTURE AND NOT FROM NON-METAL (WOOD, PLASTIC).
ISO 9001 / 14001ISO CERTIFICATE FOR QUALITY & ENVIRONMENT – OEM CERTIFICATE TO BE ENCLOSED.
ACCREDITATIONACCREDITATION CERTIFICATE FROM ANY RECOGNISED WELDING BODY (IIW, AWS, DVS, IWS, ETC…).
  
  
SCOPE OF SUPPLY 
DESCRIPTIONQTY (Nos)
WELDING SIMULATOR1 NO
REALITY HELMET1 NO
SMAW TORCH1 NO
PHYSICAL SMAW ELECTRODE1 NO
GMAW TORCH WITH NOZZLE1 NO
GTAW TORCH WITH NOZZLE1 NO